期刊文献+

某发动机压气机前轴承剥落原因分析与改进 预览

Analysis and Improvement on Spalling of Front Bearing on an Engine Compressor
在线阅读 下载PDF
收藏 分享 导出
摘要 针对某发动机压气机前支点轴承持久试车时出现剥落的问题,对失效轴承进行分析,确定轴承的失效模式为表面起源型疲劳。通过对轴承润滑环境的分析,确定导致轴承失效的主要原因是机匣内部油路残留砂粒随润滑油进入轴承内部,对滚动表面造成损伤,导致局部出现应力集中,使轴承抗疲劳能力显著下降。对机匣进行钢球振动抛磨清砂,有效清理了机匣内部油路残留物,并在发动机上通过了任务化持久试车考核验证。 Aimed at spalling of a bearing on front pivot of an engine compressor during durable trial run, the failure bearing is analyzed. The failure mode of the bearing is determined as surface initiated fatigue. Through analysis of lubricating environment of the bearing, the main failure reason is determined. The sands remaining on oil circuit inside casing enter into the bearing with oil, which causes damage to rolling surface. The local stress concentration is occurred, and the fatigue resistance of the bearing is decreased significantly. The cleaning process for sands is carried out on casing by polishing and grinding with steel ball vibration. The residues on oil circuit inside casing are cleaned up effectively, and the assessment and verification of task-based durability trial run on engine is passed.
作者 袁同燕 满维伟 YUAN Tongyan;MAN Weiwei(AECC Hunan Aviation Powerplant Research Institute,Zhuzhou 412002,China)
出处 《轴承》 北大核心 2019年第8期30-33,共4页 Bearing
关键词 三点角接触球轴承 双半内圈 疲劳剥落 残留物 失效分析 three point angular contact ball bearing two piece inner rings fatigue spalling residue failure analysis
作者简介 袁同燕(1987-),男,江西吉安人,工程师,硕士,主要从事航空发动机轴承设计与应用,E-mail:378990522@qq.com.
  • 相关文献

参考文献3

  • 1周志澜等编著..航空发动机主轴轴承失效分析与预防[M].北京:科学出版社,1998:201.
  • 2刘德林,姜涛,何玉怀,刘春江,陶春虎.浅论国内航空轴承的失效问题[J].失效分析与预防,2015,10(5):324-330. 被引量:10
  • 3陈聪慧编著..航空发动机机械系统常见故障[M].北京:航空工业出版社,2013:556.

二级参考文献10

共引文献9

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈