期刊文献+

冷邦定法制备金属粉末涂料

Preparation of metallic powder coating by cold bonding method
收藏 分享 导出
摘要 提出了一种常温下金属粉末涂料冷邦定的方法.该法首先由聚乙烯醇(PVA)胶水包裹金属铝粉制备带胶铝粉,而后通过流化床湿空气法处理带胶铝粉和粉末涂料底粉,实现二者在室温下的邦定.通过实验对流化床湿空气法中相关影响因素:流化气体相对湿度、流化时间和流化气体流量进行了考察,得出在该装置上当流化气体为饱和湿空气,流化时间为10 min,流化气体流量为0.5 L·min^-1时,邦定效果最佳.与未邦定的金属粉末涂料相比,沉积到测试板上的样品与初始样品中金属铝粉含量差值大大减小,说明金属铝粉和底粉邦定成功,制备的金属粉末涂料达到工业使用要求. A cold bonding method for preparation of metallic powder coatings at room temperature was proposed.In this method,metal aluminum flakes were firstly coated with polyvinyl alcohol(PVA) glue and then treated in the wet-air fluidized bed with coating powders to achieve their bonding.The influencing factors of wet-air fluidization method,e.g.the relative humidity and flow rate of fluidized gas,fluidization time were investigated.Within the scope of testing range,the optimal bonding effect was achieved when the fluidized gas was saturated wet air,the fluidization time was 10 min and the flow rate of the gas was 0.5 L·min^-1.Compared with the unbonded metallic powder coating,the difference of the aluminum content between the sample deposited on the test panel and the original sample was significantly reduced,which indicates that the aluminum flakes and the powder coatings were successfully bonded,and the prepared metallic powder coatings meet the industrial requirements.
作者 董帅 张海萍 邵媛媛 张辉 祝京旭 DONG Shuai;ZHANG Haiping;SHAO Yuanyuan;ZHANG ZHU Jingxu(School of Chemical Engineering and Technology,Tianjin University,Collaborative Innovation Center of Chemical Science andEngineering ( Tianjin),Tianjin,300072,China;Dept of Chemical and Biochemical Engineering,Western University,London,Ontario,N6A 5B9,Canada)
出处 《环境化学》 CAS CSCD 北大核心 2019年第6期1420-1426,共7页 Environmental Chemistry
基金 国家科技重大专项(2015ZX07202-013)资助.
关键词 金属粉末涂料 邦定 聚乙烯醇(PVA) 流化床 metallic powder coating bonding PVA fluidized bed
  • 相关文献

参考文献3

二级参考文献1

共引文献1

论文智能改写系统
维普数据出版直通车
投稿分析
职称考试

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈