期刊文献+

基于ProCAST的壳座压铸数值模拟及工艺优化

Numerical Simulation and Processing Optimization of Die-casting Shell Seat Based on the ProCAST Software
收藏 分享 导出
摘要 根据壳座压铸件的结构特点,设计出壳座压铸模具和压铸工艺,用ProCAST软件对壳座压铸充型凝固过程进行数值模拟。模拟优化出合理的压铸工艺参数:浇注温度为590℃,压射速度为3.4m/s,模具预热温度为165℃。用优化的压铸工艺参数进行压铸生产,得到了合格的壳座压铸件。金相组织观察结果表明壳座质量合格。 According to the structural characteristics of the shell seat,the die casting die and die-casting process were designed.The filling and solidification process of shell seat was simulated by the ProCAST software.The reasonable die-casting parameters were presented as follows:pouring temperature of 590℃,injection velocity of 3.4 m/s,mold preheating temperature of 165℃.The die-casting experiments with optimized die casting parameters were carried out,and qualified shell seat was manufactured sucessfully.The metallographic structure of the shell seat was observed,which verified that the quality was qualified.
作者 王成玥 胡清和 陈峰 Wang Chengyue;Hu Qinghe;Chen Feng(Institute of Art and Design,Shenyang Ligong University;Institute of Automobile and Transportation,Shenyang Ligong University)
出处 《特种铸造及有色合金》 CAS 北大核心 2019年第2期143-146,共4页 Special Casting & Nonferrous Alloys
关键词 壳座 数值模拟 充型凝固 工艺优化 Shell Seat Numerical Simulation Filling Solidification Processing Optimization
作者简介 第一作者:王成玥,女,1981年出生,副教授,沈阳(110159),电话:13898846363,E-mail:ccfwcy@126.com;通信作者:胡清和,男,1992年出生,硕士研究生,沈阳(110159),电话:17602415617,E-mail:1301659943@qq.com.
  • 相关文献

参考文献10

二级参考文献38

共引文献21

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈