期刊文献+

不同填料结构旋转床气液换热性能对比 预览

Comparative study of heat transfer performance of different types of packing in rotating bed
在线阅读 下载PDF
收藏 分享 导出
摘要 采用热空气-冷水为实验体系,利用不锈钢丝网填料和不锈钢乱堆填料的错流旋转填料床为换热设备,探究两种填料的换热性能,考察了气体进口温度T、超重力因子β、气速u、液体喷淋密度q对传热系数K的影响规律。实验结果表明:两种填料的传热系数均随T、β、u的增大而增大,随q的增大而缓慢增长;丝网填料的传热性能优于乱堆填料,约为乱堆填料的1.24~2.4倍;丝网填料的传热性能受u和q影响较大,更适合气速、液体喷淋密度较大的传热实验。对实验数据进行拟合,得出K与β、q、u、ae之间的关联式,通过统计检验,其计算值与实验值的平均误差小于15%。 Heat transfer performances of cross-current rotating packed beds with metallic wire mesh packing and metallic dumped packing, respectively, were investigated using hot gas-cold water as heat transfer system. The two packings were compared considering effect of gas inlet temperature T, high gravity factor β, gas velocity u and liquid spray density q on heat transfer coefficient K. The research results showed that heat transfer coefficient of the two packings increases with the increase of T, β and u,but increases lightly when q raises. The heat transfer characteristics of metallic wire mesh packing were 1.24-2.4 times higher than that of dumped packing. u and q have great influence on the heat transfer performance of wire mesh packing which is more suitable for high u and q on heat transfer experiment. The correlation of K and β, q, u, ae was obtained by regression of experimental data,and the statistical tests showed that average deviation between the calculated value and the experimental value was less than 15%.
作者 郑奇 郭改青 祁贵生 刘有智 武晓利 高磊 ZHENG Qi1, GUO Gai-qing2, QI Gui-sheng1, LIU You-zhi1, WU Xiao-lil,GAO Lei1(1. Research Center of Shanxi Province for High Gravity Chemical Engineering and Technology, North University of China, Taiyuan 030051, China; 2. Yangquan Coal Industry Group Taiyuan Chemical New Material Co., Ltd., Taiyuan 030400, China)
出处 《天然气化工:C1化学与化工》 CSCD 北大核心 2018年第2期104-108,共5页 Natural Gas Chemical Industry
基金 国家重点研发计划(2016YFC0204103) 山西省重点研发计划(201703D111018)
关键词 旋转填料床 填料 直接接触换热 传热系数 关联式 rotating packed bed packing direct contact heat transfer heat transfer coefficient correlation
作者简介 郑奇(1993-),男,硕士研究生,研究方向为超重力化工过程强化技术,Email:zqshang421@hotmail.com;;祁贵生,教授,Tel:0351-3921986,Email:zb-dxqgs@nuc.edu.cn.
  • 相关文献

参考文献14

二级参考文献198

共引文献50

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈